Chrysler Check Engine Light

Please wait while the page loads…

Check Engine Light Service Chrysler

What do you do when you’re driving along in your Chrysler and suddenly, a yellow light illuminates on your dash and says “Check Engine”. If you’re like most Chrysler owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your Chrysler checked as soon as functional. Ignoring that warning could end up causing major damage to expensive engine components.

When your Chrysler ‘s ECM (electronic control module), which is the vehicle’s onboard computer, finds a problem in the electronic control system that it can’t small, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it’s a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Chrysler auto repair technicians at Bill Estes Chrysler Jeep Dodge Ram. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional mechanical to embrace the issue and repair it.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your Chrysler is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few chance ways. It can say “Check Engine”, it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your Chrysler. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can suggest a variety of contrasting things. It can be as uncomplicated as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your Chrysler, contact Bill Estes Chrysler Jeep Dodge Ram. Contact Bill Estes Chrysler Jeep Dodge Ram today! Our Chrysler service department can help you find out what code is turning your check engine light on or probe why your check engine light is flashing.

What could cause the check engine light to come on in a Chrysler?

When your check engine light comes on, this could be as effortless as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a noteworthy problem that could cause noteworthy damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow continuously means something less noteworthy but a flashing check engine light implies that your vehicle’s engine is in noteworthy trouble and service is necessary straightaway. If your check engine light is flashing in your Chrysler, we extraordinarily suggest not to drive the vehicle and schedule Chrysler service today. Below is a list of the most common reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the drain of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less productive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your Chrysler ‘s spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to embrace the right differ of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.
  • New Spark Plugs or Plug Wires are crucial for your Chrysler. The spark plugs are the part of your engine that ignites the air/fuel differ in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or former, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, extensive to more pricey repairs.
  • Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your Chrysler ’s exhaust system. The catalytic converter’s function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Bill Estes Chrysler Jeep Dodge Ram offers a complimentary multi-point inspection with every Chrysler service. If you have an issue with your catalytic converter and don’t get it repaired, your Chrysler will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause alternative problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Chrysler is what determines how much fuel is crucial to run your engine efficiently by measuring the drain of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to definite changes, like altitude. If your Chrysler is having trouble starting, idling rough or has a rapid change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
  • One of the most natural and frequent cause is that your Chrysler gas cap is loose, damaged or missing. The gas cap for your Chrysler serves multiple purposes. It prevents gas fumes from being released when you aren’t driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is former or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn’t pricey. If your check engine light turns on immediately after you put gas in your Chrysler, earliest thing you should check is to make sure the cap isn’t loose — or that it’s still on your car’s roof or at the fuel pump.
  • The battery is low or dead. The battery in your Chrysler is every imperative. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don’t actually require maintenance. The price of a new one depends on the type of Chrysler you commute, but check our natural service coupons and specials.
  • Your Chrysler has a vacuum leak. Every Chrysler has a vacuum system that performs a wide variety of functions. The vacuum system also helps reduce damaging emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to massive heat or extreme cold.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or alternative item can wreak havoc on your Chrysler if it’s not installed perfectly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound prevailing, bring your to Chrysler and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren’t causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts earliest place might cost a little bit more but could save you money from having to get poor work and wear and tear caused by poor installation work corrected.

Will the check engine light reset itself?

The check engine light on your Chrysler will commonly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it’s tightened, the light will turn itself off. Likewise, if your catalytic converter is going realistic, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Chrysler light will go off after about 20-40 miles. If you commute over that fee and the light is still on, you will need to bring it in to Bill Estes Chrysler Jeep Dodge Ram so the light and code can be double-checked and reset.

Chrysler Check Engine Light

If the check engine light in your Chrysler starts flashing, that means that the problem needs immediate attention and your Chrysler should be brought in rapidly. A flashing light indicates that the problem is strict and if not taken care of rapidly may result in extraordinary damage to the car. This twinkling light usually hints a strict engine misfire allowing unburned fuel to be drained into the exhaust system. There it can instantly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can specifically be the cause. A bad, former or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very lavish repair. If your check engine light is blinking, please contact our team of automotive advisors at Bill Estes Chrysler Jeep Dodge Ram quickly by calling 3178540239.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that’s not properly tightened to a more risky failure like a bad catalytic converter or a problem with one of the car’s oxygen sensors, so it various to get the suitable code reading and diagnosis. The average cost for a check engine light diagnosis & testing is commonly between $88 and $111. The various news, Bill Estes Chrysler Jeep Dodge Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to help imply the cause of your check engine light.

Is it safe to drive your Chrysler with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is consistently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more unhealthy problem. If the check engine light is flashing, this means that there is a unhealthy issue and it is recommended to service your Chrysler instantly. Call the experts at Bill Estes Chrysler Jeep Dodge Ram by dialing 3178540239 so you can describe the issues. Or reduce your speed and bring your Chrysler to our certified mechanics as soon as probable.

Chrysler Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that slight light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your. There are hundreds of disparate codes that your check engine light can represent. While that sounds daunting, with a slight patience, tackling basic diagnostics will give you ready for use knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, pronounced and conceivable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Bad Spark Plugs
  • Old Battery
  • O2 Sensor
  • Ignition system faults
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Transmission issues

This is why it is necessary for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a relentless concern, you risk damaging your automobile further by not repairing the issue right away. Call Bill Estes Chrysler Jeep Dodge Ram at 3178540239 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out expeditiously by a certified Chrysler mechanic.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replenished. Since each check engine code has its own level of severity, it is crucial to predict how several miles you can drive with the warning light on. If you check engine light is flashing, we suggest that you pull over and contact Bill Estes Chrysler Jeep Dodge Ram to help choose if your vehicle is safe to drive in or if we suggest a tow truck.

Chrysler Check Engine Light Flashing

Although there are countless attainable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many straightforward causes including something as visible as a loose gas cap. Other straightforward reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Chrysler Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chrysler issue was fixed.

Every Chrysler was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is incorrect nor what to do about it. That’s where we come in; Bill Estes Chrysler Jeep Dodge Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceptionally Qualified Service skilled.