2017 Jeep Cherokee Check Engine Light

2017 Jeep Cherokee Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear prudent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also acknowledged as the OBD (on-board computer diagnostic system) in your Cherokee. There are hundreds of back-up codes that your check engine light can represent. While that sounds daunting, with a scant patience, tackling vital diagnostics will give you convenient knowledge about your car and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Sadly, noteworthy and vital car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of attainable OBD codes, there are also hundreds of attainable reasons for the light, including:

• Computer output circuit issues
• Bad Spark Plugs
• Fuel and air metering systems problems
• Ignition system faults
• Transmission issues
• Loose Gas Cap or Missing Gas Cap
• O2 Sensor
• Old Battery
• Emissions controls issues

This is why it is intense for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a strict concern, you risk destructive your car further by not repairing the issue noble away. Call Bill Estes Chrysler Jeep Dodge Ram at 3178540239 straightaway or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out instantly by a certified Jeep mechanic.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2017 Jeep Cherokee is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few disparate ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a collection of things for your 2017 Jeep Cherokee. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a little. With that being said, the check engine light can mean a variety of distinct things. It can be as simple as your gas cap being loose or as important as engine knocking. If your check engine light is on in your 2017 Jeep Cherokee, contact Bill Estes Chrysler Jeep Dodge Ram. Our Jeep service department can assist you find out what code is turning your check engine light on or observe why your check engine light is flashing. Contact Bill Estes Chrysler Jeep Dodge Ram today!

How many miles can you drive with the check engine light?

If you check engine light is flashing, we advise that you pull over and contact Bill Estes Chrysler Jeep Dodge Ram to help choose if your vehicle is safe to drive in or if we advise a tow truck. It could be anything from a detrimental sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is hard to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy appropriately.

Is it safe to drive your 2017 Jeep Cherokee with the check engine light on?

If the check engine light is flashing, this means that there is a dangerous issue and it is recommended to service your Jeep Cherokee hastily. This question is not especially commonplace because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be strong to drive. This is consistently indicated by a functional glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more precarious problem. Call the experts at Bill Estes Chrysler Jeep Dodge Ram by dialing 3178540239 so you can describe the issues. Or reduce your speed and bring your 2017 Jeep to our certified mechanics as soon as achievable.

2017 Jeep Cherokee Check Engine Light Flashing

Although there are bountiful possible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot commonplace causes comprising something as uncomplicated as a loose gas cap. Divergent commonplace reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name a bit. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was fixed.

Every 2017 Jeep Cherokee was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its critical systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Bill Estes Chrysler Jeep Dodge Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceptionally Qualified Service trained.

What could cause the check engine light to come on in a 2017 Jeep Cherokee?

When your check engine light comes on, this could be as functional as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a noticeable problem that could cause noticeable break to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less noticeable but a flashing check engine light indicates that your vehicle’s engine is in noticeable trouble and service is needed expeditiously. If your check engine light is flashing in your 2017 Jeep Cherokee, we exceptionally recommend not to drive the car and schedule Jeep service straightaway. Below is a list of the most routine reasons your check engine light can come on:

• One of the most friendly and copious cause is that your 2017 Jeep Cherokee gas cap is loose, damaged or missing. The gas cap for your 2017 Jeep Cherokee serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is former or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on quickly after you put gas in your 2017 Jeep Cherokee, first thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less correct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2017 Jeep Cherokee's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to imply the honorable mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep Cherokee is what determines how much fuel is mandatory to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to current changes, like altitude. If your Jeep Cherokee is having trouble starting, idling rough or has a rapid change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
• The battery is low or dead. The battery in your 2017 Jeep Cherokee is each necessary. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't truly require maintenance. The price of a new one depends on the type of Jeep you drive, but check our current service coupons and specials.
• Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2017 Jeep Cherokee’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Bill Estes Chrysler Jeep Dodge Ram offers a complimentary multi-point inspection with each Jeep service. If you have an issue with your catalytic converter and don't get it revamped, your 2017 Jeep Cherokee will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause added problems from overheating.
• New Spark Plugs or Plug Wires are mandatory for your 2017 Jeep Cherokee. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or former, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more expensive repairs.
• Your 2017 Jeep Cherokee has a vacuum leak. Each Jeep Cherokee has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, excessively if they’re exposed to extraordinary heat or extreme freezing.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2017 Jeep Cherokee if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound known, bring your Cherokee to Jeep and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, excessively aftermarket parts and accessories, or using OEM parts first place might estimate a scant bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.

2017 Jeep Cherokee Check Engine Light

If the check engine light in your 2017 Jeep Cherokee starts shining, that means that the problem needs quick attention and your Jeep should be brought in immediately. A shining light indicates that the problem is risky and if not taken care of immediately may result in dominant damage to the vehicle. This blinking light usually illustrates a draconian engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly hike the temperature of the catalytic converter to a point where break is possible, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can totally be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a particularly expensive repair. If your check engine light is flashing, please contact our team of automotive veterans at Bill Estes Chrysler Jeep Dodge Ram suddenly by calling 3178540239.

Will the check engine light reset itself?

The check engine light on your 2017 Jeep Cherokee will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2017 Jeep Cherokee light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Chrysler Jeep Dodge Ram so the light and code can be double-checked and reset.

Check Engine Light Service 2017 Jeep Cherokee

What do you do when you’re driving along in your Jeep Cherokee and suddenly, a yellow light flashes on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks a bit because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2017 Jeep Cherokee checked as soon as convenient. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2017 Jeep Cherokee's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t handy, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic scan tool that is used by our Jeep auto repair mechanics at Bill Estes Chrysler Jeep Dodge Ram. There are also a number of comparatively low-cost code readers that are designed for do-it-yourselfers, should you edge that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to mean the issue and repair it.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is mostly between $88 and $111. The satisfactory news, Bill Estes Chrysler Jeep Dodge Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to help pick the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more important failure like a detrimental catalytic converter or a problem with one of the car's oxygen sensors, so it satisfactory to get the suitable code reading and diagnosis.