2016 Jeep Cherokee Check Engine Light

2016 Jeep Cherokee Check Engine Light Flashing

Although there are many capability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several regular causes including something as discernable as a loose gas cap. Further regular reasons for a Check Engine Light are damaged oxygen sensor, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was fixed.

Every 2016 Jeep Cherokee was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its enormous systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is culpable nor what to do about it. That’s where we come in; Bill Estes Chrysler Jeep Dodge Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Incredibly Qualified Service professional.

Will the check engine light reset itself?

The check engine light on your 2016 Jeep Cherokee will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going suitable, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Jeep Cherokee light will go off after about 20-40 miles. If you drive over that sum and the light is still on, you will need to bring it in to Bill Estes Chrysler Jeep Dodge Ram so the light and code can be double-checked and reset.

Check Engine Light Service 2016 Jeep Cherokee

What do you do when you’re driving along in your Jeep Cherokee and immediately, a yellow light lights up on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks some because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t represent you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Jeep Cherokee checked as soon as possible. Ignoring that warning could end up causing gargantuan damage to fancy engine components.

When your 2016 Jeep Cherokee's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t honorable, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electrical scan tool that is used by our Jeep auto repair mechanics at Bill Estes Chrysler Jeep Dodge Ram. There are also a number of relatively economical code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to edge the issue and repair it.

2016 Jeep Cherokee Check Engine Light

If the check engine light in your 2016 Jeep Cherokee starts blinking, that means that the problem needs prompt attention and your Jeep should be brought in urgently. A blinking light suggests that the problem is unhealthy and if not taken care of urgently may result in major damage to the vehicle. This blinking light usually indicates a rigorous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can suddenly enhance the temperature of the catalytic converter to a point where damage is convincing, requiring an pricey repair. Some owners ask if spark plugs cause the check engine light to flash? This can surely be the cause. A bad, common or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our squad of automotive advisors at Bill Estes Chrysler Jeep Dodge Ram abruptly by calling 3178540239. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

2016 Jeep Cherokee Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear decent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your Cherokee. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling established diagnostics will give you useful knowledge about your vehicle and will also allow that Check Engine Light to do what it is absolutely supposed to do: be your guide. Regrettably, detectable and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of viable OBD codes, there are also hundreds of viable reasons for the light, including:

• Bad Spark Plugs
• Transmission issues
• Ignition system faults
• Emissions controls issues
• O2 Sensor
• Loose Gas Cap or Missing Gas Cap
• Old Battery
• Computer output circuit issues
• Fuel and air metering systems problems

This is why it is basic for someone who does not have contrasting of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out instantly by a certified Jeep mechanic. If the engine light comes on due to a miraculous concern, you risk damaging your car disparate by not repairing the issue honorable away. Call Bill Estes Chrysler Jeep Dodge Ram at 3178540239 now or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2016 Jeep Cherokee is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in several divergent ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2016 Jeep Cherokee. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of distinct things. It can be as easy as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2016 Jeep Cherokee, contact Bill Estes Chrysler Jeep Dodge Ram. Contact Bill Estes Chrysler Jeep Dodge Ram today! Our Jeep service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

Is it safe to drive your 2016 Jeep Cherokee with the check engine light on?

If the check engine light is flashing, this means that there is a draconian issue and it is recommended to service your Jeep Cherokee urgently. This question is not very affectionate because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is commonly indicated by a logical glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more stern problem. Call the consultants at Bill Estes Chrysler Jeep Dodge Ram by dialing 3178540239 so you can describe the issues. Or cut down your speed and bring your 2016 Jeep to our certified mechanics as soon as functional.

What could cause the check engine light to come on in a 2016 Jeep Cherokee?

When your check engine light comes on, this could be as indisputable as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a alarming problem that could cause alarming damage to your engine and come with a dominant repair bill. Depending on your make and model, the check engine light will illuminate or blink. A common glow mostly means something less alarming but a flashing check engine light indicates that your vehicle’s engine is in alarming trouble and service is needed shortly. If your check engine light is flashing in your 2016 Jeep Cherokee, we largely recommend not to drive the vehicle and schedule Jeep service today. Below is a list of the most indisputable reasons your check engine light can come on:

• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the discard of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less apt when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2016 Jeep Cherokee's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the correct collection of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a car to fail an emissions test.
• Your 2016 Jeep Cherokee has a vacuum leak. Every Jeep Cherokee has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to notable heat or extreme cold.
• New Spark Plugs or Plug Wires are decisive for your 2016 Jeep Cherokee. The spark plugs are the part of your engine that ignites the air/fuel collection in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or classic, you will experience poor performance and reduced power. In a bit extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, primary to more expensive repairs.
• One of the most prominent and frequent cause is that your 2016 Jeep Cherokee gas cap is loose, damaged or missing. The gas cap for your 2016 Jeep Cherokee serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2016 Jeep Cherokee, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• The battery is low or dead. The battery in your 2016 Jeep Cherokee is every laborious. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a bit decades ago, and they don't certainly require maintenance. The estimate of a new one depends on the type of Jeep you drive, but check our ongoing service coupons and specials.
• Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your 2016 Jeep Cherokee’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Bill Estes Chrysler Jeep Dodge Ram offers a complimentary multi-point inspection with every Jeep service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Jeep Cherokee will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep Cherokee is what determines how much fuel is decisive to run your engine efficiently by measuring the discard of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to sizable changes, like altitude. If your Jeep Cherokee is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2016 Jeep Cherokee if it’s not installed accurately. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound traditional, bring your Cherokee to Jeep and have our unit of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might estimate a little bit more but could save you money from having to get poor work and wear and tear caused by poor installation work corrected.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is customarily between $88 and $111. The wide news, Bill Estes Chrysler Jeep Dodge Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to help learn the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it wide to get the relevant code reading and diagnosis.

How many miles can you drive with the check engine light?

It could be anything from a detrimental sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is shining, we recommend that you pull over and contact Bill Estes Chrysler Jeep Dodge Ram to help choose if your vehicle is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is troublesome to predict how many miles you can drive with the warning light on.