2016 Dodge Challenger Check Engine Light

What could cause the check engine light to come on in a 2016 Dodge Challenger?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a memorable problem that could cause memorable damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow frequently means something less memorable but a flashing check engine light suggests that your vehicle’s engine is in memorable trouble and service is mandatory instantly. If your check engine light is flashing in your 2016 Dodge Challenger, we highly recommend not to commute the vehicle and schedule Dodge service now. Below is a list of the most useful reasons your check engine light can come on:

• One of the most current and frequent cause is that your 2016 Dodge Challenger gas cap is loose, damaged or missing. The gas cap for your 2016 Dodge Challenger serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on now after you put gas in your 2016 Dodge Challenger, authentic thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or diverse item can wreak havoc on your 2016 Dodge Challenger if it’s not installed perfectly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even impede the vehicle from starting. If these issues sound routine, bring your Challenger to Dodge and have our company of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts authentic place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Dodge Challenger is what determines how much fuel is fundamental to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to decisive changes, like altitude. If your Dodge Challenger is having trouble starting, idling rough or has a swift change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
• Your 2016 Dodge Challenger has a vacuum leak. Every Dodge Challenger has a vacuum system that performs a gigantic variety of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to important heat or extreme bitter.
• The battery is meager or dead. The battery in your 2016 Dodge Challenger is every splendid. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't absolutely require maintenance. The price of a new one depends on the type of Dodge you drive, but check our extant service coupons and specials.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 Dodge Challenger’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Bill Estes Chrysler Jeep Dodge Ram offers a complimentary multi-point inspection with every Dodge service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Dodge Challenger will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause diverse problems from overheating.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer reasonable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Dodge Challenger's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to elect for the polite range of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
• New Spark Plugs or Plug Wires are fundamental for your 2016 Dodge Challenger. The spark plugs are the part of your engine that ignites the air/fuel range in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, primary to more lavish repairs.

Will the check engine light reset itself?

The check engine light on your 2016 Dodge Challenger will naturally shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did several of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Dodge Challenger light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Chrysler Jeep Dodge Ram so the light and code can be double-checked and reset.

Is it safe to drive your 2016 Dodge Challenger with the check engine light on?

If the check engine light is shining, this means that there is a draconian issue and it is recommended to service your Dodge Challenger shortly. This question is not very indisputable because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is normally indicated by a feasible glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more exacting problem. Call the consultants at Bill Estes Chrysler Jeep Dodge Ram by dialing 3178540239 so you can describe the issues. Or cut your speed and bring your 2016 Dodge to our certified mechanics as soon as conceivable.

2016 Dodge Challenger Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly lights up, but in reality, it is not something that should cause you to shut down in fear honest away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your Challenger. There are hundreds of distinctive codes that your check engine light can represent. While that sounds daunting, with a scant patience, tackling basic diagnostics will give you comfortable knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, clear and convenient vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of viable OBD codes, there are also hundreds of viable reasons for the light, including:

• Bad Spark Plugs
• Ignition system faults
• O2 Sensor
• Old Battery
• Fuel and air metering systems problems
• Computer output circuit issues
• Emissions controls issues
• Transmission issues
• Loose Gas Cap or Missing Gas Cap

This is why it is memorable for someone who does not have assorted of automotive knowledge to not assume what a code means. If the engine light comes on due to a unhealthy concern, you risk damaging your car further by not repairing the issue polite away. Call Bill Estes Chrysler Jeep Dodge Ram at 3178540239 at this moment or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out shortly by a certified Dodge mechanic.

Check Engine Light Service 2016 Dodge Challenger

What do you do when you’re driving along in your Dodge Challenger and immediately, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Dodge owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Dodge Challenger checked as soon as feasible. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2016 Dodge Challenger's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t real, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Dodge auto repair mechanics at Bill Estes Chrysler Jeep Dodge Ram. There are also a number of relatively honest code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced trained to learn the issue and repair it.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2016 Dodge Challenger is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in plentiful added ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2016 Dodge Challenger. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of clear-cut things. It can be as easy as your gas cap being loose or as adequate as engine knocking. If your check engine light is on in your 2016 Dodge Challenger, contact Bill Estes Chrysler Jeep Dodge Ram. Our Dodge service department can help you learn what code is turning your check engine light on or diagnose why your check engine light is blinking. Contact Bill Estes Chrysler Jeep Dodge Ram today!

2016 Dodge Challenger Check Engine Light

If the check engine light in your 2016 Dodge Challenger starts flashing, that means that the problem needs urgent attention and your Dodge should be delivered in straightaway. A flashing light implies that the problem is harsh and if not taken care of straightaway may result in active damage to the vehicle. This blinking light usually indicates a scrupulous engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can rapidly increase the temperature of the catalytic converter to a point where damage is attainable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a highly expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Bill Estes Chrysler Jeep Dodge Ram immediately by calling 3178540239.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is difficult to predict how plentiful miles you can drive with the warning light on. If you check engine light is shining, we recommend that you pull over and contact Bill Estes Chrysler Jeep Dodge Ram to help designate if your vehicle is safe to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly.

2016 Dodge Challenger Check Engine Light Flashing

Although there are countless achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are bountiful commonplace causes including something as classic as a loose gas cap. Substitute commonplace reasons for a Check Engine Light are damaged oxygen sensor, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Dodge Certified Mechanics and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Dodge issue was fixed.

Every 2016 Dodge Challenger was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its laborious systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what absolutely is mistaken nor what to do about it. That’s where we come in; Bill Estes Chrysler Jeep Dodge Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service compelling.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is continuously between $88 and $111. The apprehensive news, Bill Estes Chrysler Jeep Dodge Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not subsequently tightened to a more perilous failure like a destructive catalytic converter or a problem with one of the car's oxygen sensors, so it apprehensive to get the fitting code reading and diagnosis.