2015 Jeep Cherokee Check Engine Light

Please wait while the page loads...

What could cause the check engine light to come on in a 2015 Jeep Cherokee?

When your check engine light comes on, this could be as prevailing as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a rigorous problem that could cause rigorous damage to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow constantly means something less rigorous but a flashing check engine light indicates that your vehicle’s engine is in rigorous trouble and service is basic shortly. If your check engine light is flashing in your 2015 Jeep Cherokee, we excessively recommend not to drive the car and schedule Jeep service today. Below is a list of the most prevalent reasons your check engine light can come on:

  • One of the most conscious and copious cause is that your 2015 Jeep Cherokee gas cap is loose, damaged or missing. The gas cap for your 2015 Jeep Cherokee serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a combative fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on shortly after you put gas in your 2015 Jeep Cherokee, earliest thing you should check is to make fearless the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep Cherokee is what determines how much fuel is needed to run your engine efficiently by measuring the deposit of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to keen changes, like altitude. If your Jeep Cherokee is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a combative mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your 2015 Jeep Cherokee if it’s not installed appropriately. These aftermarket parts and accessories can ditch the battery, trigger the check engine light, or even impede the vehicle from starting. If these issues sound conscious, deliver your Cherokee to Jeep and have our team of certified mechanics ensure that your aftermarket items were installed appropriately and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM parts earliest place might cost a bit bit more but could save you money from having to get poor function and damage caused by poor installation function corrected.
  • Your catalytic converter is combative or going combative. The catalytic converter is a part of your 2015 Jeep Cherokee’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Bill Estes Chrysler Jeep Dodge Ram offers a complimentary multi-point inspection with every Jeep service. If you have an issue with your catalytic converter and don't get it repaired, your 2015 Jeep Cherokee will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
  • Your 2015 Jeep Cherokee has a vacuum leak. Every Jeep Cherokee has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dehydrated out and crack, chiefly if they’re exposed to intense heat or extreme cold.
  • The battery is low or dead. The battery in your 2015 Jeep Cherokee is every fundamental. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't genuinely require maintenance. The rate of a new one depends on the type of Jeep you drive, but check our current service coupons and specials.
  • New Spark Plugs or Plug Wires are needed for your 2015 Jeep Cherokee. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are combative or historic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more lavish repairs.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the deposit of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less practical when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2015 Jeep Cherokee's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to select the decent variety of air and fuel that enters the cylinders in your engine. A combative O2 sensor can also cause a car to fail an emissions test.

Is it safe to drive your 2015 Jeep Cherokee with the check engine light on?

If the check engine light is flashing, this means that there is a unhealthy issue and it is recommended to service your Jeep Cherokee immediately. This question is not very clear-cut because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to travel to work. This is regularly indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more alarming problem. Call the veterans at Bill Estes Chrysler Jeep Dodge Ram by dialing 3178540239 so you can describe the issues. Or decrease your speed and bring your 2015 Jeep to our certified mechanics as soon as functional.

2015 Jeep Cherokee Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear modest away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also certain as the OBD (on-board computer diagnostic system) in your Cherokee. There are hundreds of back-up codes that your check engine light can mean. While that sounds daunting, with a little patience, tackling fundamental diagnostics will give you realistic knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, distinct and realistic vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are also hundreds of potential reasons for the light, including:

  • Old Battery
  • Fuel and air metering systems problems
  • Transmission issues
  • Ignition system faults
  • Bad Spark Plugs
  • Emissions controls issues
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues

This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a precarious concern, you risk detrimental your car extra by not repairing the issue right away. Call Bill Estes Chrysler Jeep Dodge Ram at 3178540239 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out rapidly by a certified Jeep mechanic.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more harsh failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the feasible code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is typically between $88 and $111. The good news, Bill Estes Chrysler Jeep Dodge Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to assist represent the cause of your check engine light.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Bill Estes Chrysler Jeep Dodge Ram to help read if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is rigid to predict how innumerable miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy properly.

2015 Jeep Cherokee Check Engine Light Flashing

Although there are many potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful prevailing causes incorporating something as pure as a loose gas cap. Distinctive prevailing reasons for a Check Engine Light are dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was fixed.

Every 2015 Jeep Cherokee was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its convenient systems. The sensors are continually detecting conditions while sending data to the electronic control team. If the electronic control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what solely is wrong nor what to do about it. That’s where we come in; Bill Estes Chrysler Jeep Dodge Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Hugely Qualified Service professional.

Will the check engine light reset itself?

The check engine light on your 2015 Jeep Cherokee will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2015 Jeep Cherokee light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Chrysler Jeep Dodge Ram so the light and code can be double-checked and reset.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2015 Jeep Cherokee is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2015 Jeep Cherokee. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can indicate a range of confident things. It can be as simple as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2015 Jeep Cherokee, contact Bill Estes Chrysler Jeep Dodge Ram. Our Jeep service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is glaring. Contact Bill Estes Chrysler Jeep Dodge Ram today!

2015 Jeep Cherokee Check Engine Light

A glaring light indicates that the problem is critical and if not taken care of immediately may result in competent break to the vehicle. If the check engine light in your 2015 Jeep Cherokee starts glaring, that means that the problem needs nimble attention and your Jeep should be brought in immediately. This blinking light usually indicates a scrupulous engine misfire allowing unburned fuel to be ejected into the exhaust system. There it can rapidly increase the temperature of the catalytic converter to a point where damage is potential, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, departed or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Bill Estes Chrysler Jeep Dodge Ram quickly by calling 3178540239. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very pricey repair.

Check Engine Light Service 2015 Jeep Cherokee

What do you do when you’re driving along in your Jeep Cherokee and hastily, a yellow light flashes on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks a few because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2015 Jeep Cherokee checked as soon as feasible. Ignoring that warning could end up causing leading damage to expensive engine components.

When your 2015 Jeep Cherokee's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic inspect tool that is used by our Jeep auto repair mechanics at Bill Estes Chrysler Jeep Dodge Ram. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced trained to elect for the issue and repair it.