2014 Jeep Wrangler Check Engine Light

2014 Jeep Wrangler Check Engine Light

A flashing light indicates that the problem is powerful and if not taken care of shortly may result in major damage to the car. If the check engine light in your 2014 Jeep Wrangler starts flashing, that means that the problem needs urgent attention and your Jeep should be brought in shortly. This glaring light frequently implies a strict engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can abruptly raise the temperature of the catalytic converter to a point where wear and tear is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can totally be the cause. A bad, former or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our department of automotive experts at Bill Estes Chrysler Jeep Dodge Ram urgently by calling 3178540239. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a particularly expensive repair.

What Does the Check Engine Light Mean?

One of the most normally misunderstood lights or indicators in your 2014 Jeep Wrangler is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few other ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Jeep Wrangler. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a collection of disparate things. It can be as common as your gas cap being loose or as unhealthy as engine knocking. If your check engine light is on in your 2014 Jeep Wrangler, contact Bill Estes Chrysler Jeep Dodge Ram. Our Jeep service department can help you pick what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Bill Estes Chrysler Jeep Dodge Ram today!

Is it safe to drive your 2014 Jeep Wrangler with the check engine light on?

If the check engine light is flashing, this means that there is a risky issue and it is recommended to service your Jeep Wrangler now. This question is not incredibly compelling because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to travel to work. This is naturally indicated by a dependable glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more perilous problem. Call the experts at Bill Estes Chrysler Jeep Dodge Ram by dialing 3178540239 so you can describe the issues. Or lower down your speed and bring your 2014 Jeep to our certified mechanics as soon as functional.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more dangerous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it bizarre to get the accessible code reading and diagnosis. The average cost for a check engine light diagnosis & testing is normally between $88 and $111. The bizarre news, Bill Estes Chrysler Jeep Dodge Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to help choose the cause of your check engine light.

2014 Jeep Wrangler Check Engine Light Flashing

Although there are countless conceivable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are copious commonplace causes including something as easy as a loose gas cap. Alternative commonplace reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, faulty head gasket, a malfunction with the fuel injection system, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was fixed.

Every 2014 Jeep Wrangler was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is awry nor what to do about it. That’s where we come in; Bill Estes Chrysler Jeep Dodge Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

Will the check engine light reset itself?

The check engine light on your 2014 Jeep Wrangler will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going judicious, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Jeep Wrangler light will go off after about 20-40 miles. If you drive over that payment and the light is still on, you will need to bring it in to Bill Estes Chrysler Jeep Dodge Ram so the light and code can be double-checked and reset.

2014 Jeep Wrangler Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard suddenly lights up, but in reality, it is not something that should cause you to shut down in fear good away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Wrangler. There are hundreds of assorted codes that your check engine light can determine. While that sounds daunting, with a small patience, tackling meaningful diagnostics will give you accessible knowledge about your vehicle and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Sadly, precise and comfortable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are also hundreds of potential reasons for the light, including:

• Loose Gas Cap or Missing Gas Cap
• Transmission issues
• Emissions controls issues
• Ignition system faults
• Old Battery
• Bad Spark Plugs
• Fuel and air metering systems problems
• Computer output circuit issues
• O2 Sensor

This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a remarkable concern, you risk treacherous your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out hastily by a certified Jeep mechanic. Call Bill Estes Chrysler Jeep Dodge Ram at 3178540239 today or schedule your check engine light service online today!

How many miles can you drive with the check engine light?

It could be anything from a detrimental sensor to plug wires needing to be replaced. If you check engine light is flashing, we advise that you pull over and contact Bill Estes Chrysler Jeep Dodge Ram to help learn if your vehicle is safe to drive in or if we advise a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is hard to predict how several miles you can drive with the warning light on.

Check Engine Light Service 2014 Jeep Wrangler

What do you do when you’re driving along in your Jeep Wrangler and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t express you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Jeep Wrangler checked as soon as likely. Ignoring that warning could end up causing heavy wear and tear to pricey engine components.

When your 2014 Jeep Wrangler's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t authentic, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Jeep auto repair mechanics at Bill Estes Chrysler Jeep Dodge Ram. There are also a number of relatively decent code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled experienced to mean the issue and repair it.

What could cause the check engine light to come on in a 2014 Jeep Wrangler?

When your check engine light comes on, this could be as disparate as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a alarming problem that could cause alarming wear and tear to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow consistently means something fewer alarming but a flashing check engine light indicates that your vehicle’s engine is in alarming trouble and service is essential suddenly. If your check engine light is flashing in your 2014 Jeep Wrangler, we immensely advocate not to drive the vehicle and schedule Jeep service straightaway. Below is a list of the most authentic reasons your check engine light can come on:

• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep Wrangler is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to keen changes, like altitude. If your Jeep Wrangler is having trouble starting, idling rough or has a fast change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less functional when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2014 Jeep Wrangler's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to read the proper mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a vehicle to fail an emissions test.
• New Spark Plugs or Plug Wires are decisive for your 2014 Jeep Wrangler. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, considerable to more expensive repairs.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or disparate item can wreak havoc on your 2014 Jeep Wrangler if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound common, transport your Wrangler to Jeep and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might rate a little bit more but could save you money from having to get poor work and wear and tear caused by poor installation work corrected.
• Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2014 Jeep Wrangler’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Bill Estes Chrysler Jeep Dodge Ram offers a complimentary multi-point inspection with every Jeep service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Jeep Wrangler will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause disparate problems from overheating.
• The battery is low or dead. The battery in your 2014 Jeep Wrangler is every instinctive. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of Jeep you drive, but check our contemporary service coupons and specials.
• Your 2014 Jeep Wrangler has a vacuum leak. Every Jeep Wrangler has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut down damaging emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to active heat or extreme freezing.
• One of the most known and copious cause is that your 2014 Jeep Wrangler gas cap is loose, damaged or missing. The gas cap for your 2014 Jeep Wrangler serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on abruptly after you put gas in your 2014 Jeep Wrangler, first thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.