2013 Dodge Charger Check Engine Light
2013 Dodge Charger Check Engine Light
If the check engine light in your 2013 Dodge Charger starts flashing, that means that the problem needs immediate attention and your Dodge should be brought in immediately. A flashing light indicates that the problem is rigid and if not taken care of immediately may result in large damage to the vehicle. This twinkling light usually indicates a exacting engine misfire allowing unburned fuel to be discharged into the exhaust system. There it can abruptly increase the temperature of the catalytic converter to a point where damage is likely, requiring an pricey repair. Some owners ask if spark plugs cause the check engine light to flash? This can truly be the cause. A bad, former or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive advisors at Bill Estes Chrysler Jeep Dodge Ram shortly by calling 3178540239. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a remarkably expensive repair.
Check Engine Light Service 2013 Dodge Charger
What do you do when you’re driving along in your Dodge Charger and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Dodge owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Dodge Charger checked as soon as conscious. Ignoring that warning could end up causing major damage to fancy engine components.
When your 2013 Dodge Charger's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t equitable, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”
When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electrical scan tool that is used by our Dodge auto repair technicians at Bill Estes Chrysler Jeep Dodge Ram. There are also a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you elect for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced technological to represent the issue and repair it.
What could cause the check engine light to come on in a 2013 Dodge Charger?
When your check engine light comes on, this could be as common as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a applicable problem that could cause applicable damage to your engine and come with a enormous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow commonly means something less applicable but a shining check engine light indicates that your vehicle’s engine is in applicable trouble and service is basic immediately. If your check engine light is shining in your 2013 Dodge Charger, we extraordinarily advocate not to travel to work the vehicle and schedule Dodge service today. Below is a list of the most famous reasons your check engine light can come on:
- The battery is meager or dead. The battery in your 2013 Dodge Charger is every memorable. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did various decades ago, and they don't really require maintenance. The price of a new one depends on the type of Dodge you drive, but check our current service coupons and specials.
- Issues with any aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2013 Dodge Charger if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound present, bring your Charger to Dodge and have our team of certified mechanics ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, hugely aftermarket parts and accessories, or using OEM parts first place might estimate a little bit more but could save you money from having to get meager work and damage caused by meager installation work corrected.
- New Spark Plugs or Plug Wires are necessary for your 2013 Dodge Charger. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or historic, you will experience meager performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, sizable to more expensive repairs.
- Your mass airflow sensor (known as MAF) needs to be interchanged. The mass airflow sensor in your Dodge Charger is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to feasible changes, like altitude. If your Dodge Charger is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
- One of the most present and frequent cause is that your 2013 Dodge Charger gas cap is loose, damaged or missing. The gas cap for your 2013 Dodge Charger serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2013 Dodge Charger, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
- Your 2013 Dodge Charger has a vacuum leak. Every Dodge Charger has a vacuum system that performs a wide variety of functions. The vacuum system also helps decrease harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, hugely if they’re exposed to exciting heat or extreme speedy.
- Your O2 Sensor (Oxygen Sensor) needs to be interchanged. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less functional when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Dodge Charger's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the polite mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
- Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Dodge Charger’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Bill Estes Chrysler Jeep Dodge Ram offers a complimentary multi-point inspection with every Dodge service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Dodge Charger will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
Is it safe to drive your 2013 Dodge Charger with the check engine light on?
This question is not chiefly straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a dependable glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more precarious problem. If the check engine light is flashing, this means that there is a precarious issue and it is recommended to service your Dodge Charger quickly. Call the advisors at Bill Estes Chrysler Jeep Dodge Ram by dialing 3178540239 so you can describe the issues. Or reduce your speed and bring your 2013 Dodge to our certified mechanics as soon as achievable.
2013 Dodge Charger Check Engine Light Codes
The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard instantly illuminates, but in reality, it is not something that should cause you to shut down in fear honorable away. If you hear the term, diagnostic trouble codes (DTC), these are just additional name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Charger. There are hundreds of distinctive codes that your check engine light can represent. While that sounds daunting, with a miniature patience, tackling paramount diagnostics will give you convenient knowledge about your automobile and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, bold and bold automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of exact OBD codes, there are also hundreds of exact reasons for the light, including:
- Old Battery
- Loose Gas Cap or Missing Gas Cap
- Fuel and air metering systems problems
- O2 Sensor
- Transmission issues
- Ignition system faults
- Emissions controls issues
- Bad Spark Plugs
- Computer output circuit issues
This is why it is meaningful for someone who does not have assorted of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out rapidly by a certified Dodge mechanic. If the engine light comes on due to a exceptional concern, you risk destructive your automobile further by not repairing the issue noble away. Call Bill Estes Chrysler Jeep Dodge Ram at 3178540239 straightaway or schedule your check engine light service online today!
What Does the Check Engine Light Mean?
One of the most typically misunderstood lights or indicators in your 2013 Dodge Charger is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few odd ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2013 Dodge Charger. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name assorted. With that being said, the check engine light can represent a collection of disparate things. It can be as classic as your gas cap being loose or as critical as engine knocking. If your check engine light is on in your 2013 Dodge Charger, contact Bill Estes Chrysler Jeep Dodge Ram. Our Dodge service department can help you select what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Bill Estes Chrysler Jeep Dodge Ram today!
How many miles can you drive with the check engine light?
If you check engine light is flashing, we endorse that you pull over and contact Bill Estes Chrysler Jeep Dodge Ram to help select if your vehicle is safe to drive in or if we endorse a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. Since any check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on.
Will the check engine light reset itself?
The check engine light on your 2013 Dodge Charger will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Dodge Charger light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Chrysler Jeep Dodge Ram so the light and code can be double-checked and reset.
2013 Dodge Charger Check Engine Light Flashing
Although there are countless conceivable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several current causes encompassing something as effortless as a loose gas cap. Other current reasons for a Check Engine Light are damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Dodge Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Dodge issue was fixed.
Every 2013 Dodge Charger was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its exciting systems. The sensors are often detecting conditions while sending data to the electronic control squad. If the electronic control squad detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is remorseful nor what to do about it. That’s where we come in; Bill Estes Chrysler Jeep Dodge Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service trained.
How much does it cost to get the engine light checked?
The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it accessible to get the correct code reading and diagnosis. The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The accessible news, Bill Estes Chrysler Jeep Dodge Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to assist determine the cause of your check engine light.